Filters & spare parts for industry For maintenance, workshops & operations

Original part

MANN-FILTER H-7010hidraulic filter

The MANN-FILTER designation for H 7010 is hydraulic filter. Manufacturer dimensions: Outer diameter (A) 62 mm, Inner diameter (B) 29 mm, Height (H) 305 mm.

MANN-FILTER H 7010

Identify this item

FilterSeek item number
FS-2062741
Filter type
Hydraulic filters
Reference number
H-7010
Reference brand
MANN-FILTER
Version
Original part
Outer diameter (A)
62 mm
Inner diameter (B)
29 mm
Height (H)
305 mm
Design
Filter element
GTIN
4011558059484

Filter selection guides

Selecting a hydraulic element for its housing

Compare H 7010 with the complete marking on the installed component. Include suffixes, leading zeros and the position in the parts diagram when checking the reference.

First identify whether the element serves a pressure line, return line or separate filtration circuit. The marking on the filter head identifies the housing. The marking on the removed element identifies its configuration. Record both when specifying a replacement.

What to check on the installed part

Physical fit
Check length, outside diameter, mounting and end caps. Identically sized elements can contain different media and seals.
Rating and media
Compare the stated efficiency, micron rating and hydraulic fluid with the requirements for the circuit.
Bypass and seal
Establish whether the bypass valve is in the element or housing. Record its setting and the seal material.

Before and after a filter change

Illustration of a visibly soiled filter element
Before · used element
Illustration of a clean element of the same type
After · new element

AI-generated application example. These illustrations show the visible condition of a filter design. Base a replacement decision on measurements and the equipment maintenance instructions.

Questions about selection and replacement

Can I select an element using only its micron rating?

Also check the size, sealing arrangement and efficiency specification. Bypass pressure describes the valve setting. Use the housing documentation for the permissible system pressure.

Technical background · HYDAC · Filter FAQ ↗