Filters & spare parts for industry For maintenance, workshops & operations

Replacement for the reference

MANN-FILTER H13104Hydraulic filter

Replacement part for the listed reference. If the markings on your installed part differ, send us a photograph.

Identify this item

FilterSeek item number
FS-466537
Filter type
Hydraulic filters
Reference designation
MANN FILTER H13104 alternative hydraulic filter
Reference number
H13104
Reference brand
MANN-FILTER
Version
Replacement for the reference

Filter selection guides

Selecting a hydraulic element for its housing

This replacement is listed against reference H13104. Record the manufacturer of the installed part separately from the supplier of the replacement, then check the version required by your machine.

First identify whether the element serves a pressure line, return line or separate filtration circuit. The marking on the filter head identifies the housing. The marking on the removed element identifies its configuration. Record both when specifying a replacement.

Versions listed against the same reference

These items have the same reference brand and normalized reference number. Check the marking and the stated version before selecting a part.

FilterSeekReferenceVersion
FS-467536H13104Replacement
FS-2062610H-13-104Listed as original

What to check on the installed part

Physical fit
Check length, outside diameter, mounting and end caps. Identically sized elements can contain different media and seals.
Rating and media
Compare the stated efficiency, micron rating and hydraulic fluid with the requirements for the circuit.
Bypass and seal
Establish whether the bypass valve is in the element or housing. Record its setting and the seal material.

Before and after a filter change

Illustration of a visibly soiled filter element
Before · used element
Illustration of a clean element of the same type
After · new element

AI-generated application example. These illustrations show the visible condition of a filter design. Base a replacement decision on measurements and the equipment maintenance instructions.

Questions about selection and replacement

Can I select an element using only its micron rating?

Also check the size, sealing arrangement and efficiency specification. Bypass pressure describes the valve setting. Use the housing documentation for the permissible system pressure.

Technical background · HYDAC · Filter FAQ ↗